FDM 3D Printing Service
3D PRINTING

FDM 3D Printing Service

Fused Deposition Modelling for durable prototypes and end-use parts — from single units to small batches, with 30+ proven thermoplastics.

Industrial FDM 3D printer
400×400×400mm
Max Build Volume
±0.2mm
Standard Tolerance
2-4 Days
Lead Time
30+
Materials Available
WHAT IS FDM?

What Is Fused Deposition Modelling?

FDM works by heating a thermoplastic filament and extruding it through a nozzle, layer by layer, to build parts from the bottom up. Each pass deposits a thin bead of molten material that fuses to the layer below, creating a solid part directly from a 3D file — no tooling required.

It is the most widely adopted 3D printing process for functional prototypes, jigs and fixtures, and end-use parts, offering the broadest material selection of any polymer process. From a single unit to a few hundred pieces, FDM delivers predictable mechanical performance at a low cost per part.

Broadest material range
Functional, load-bearing parts
Low cost per part
Fast turnaround
Easy to iterate and revise
Minimal material waste
Large build envelope
Complex geometries, no tooling
FDM printed enclosure with visible layer lines
Fast Turnaround
From confirmed file to shipped parts in as little as 2 days.
Widest Material Range
Over 30 thermoplastics, from everyday PLA to engineering-grade PEEK blends.
Functional Strength
Built for real-world load, heat and chemical exposure — not just looks.
Low Cost Per Part
No tooling investment — economical for one-offs through to mid volumes.

How It Works

Upload Your File
Share your STL, STEP or OBJ file — we review it for printability.
Slicing & Setup
We prepare your file and choose layer height, infill and support strategy.
Layer-by-Layer Printing
Your part is built with precision on calibrated industrial machines.
Post-Processing & QC
Support removal, finishing, dimensional inspection and packing.

FDM Materials

Eight of our most requested thermoplastics — colour, stiffness, flexibility and heat resistance each covered.

PLA sample
PLA
Easy to print, great for prototypes and visual models.
ABS sample
ABS
Strong, durable and impact-resistant for mechanical parts.
PETG sample
PETG
Clear, tough and moisture-resistant — good chemical stability.
TPU sample
TPU
Flexible, rubber-like and durable for seals and grips.
ASA sample
ASA
UV-resistant and weather-stable for outdoor use.
Nylon sample
Nylon (PA)
Strong, flexible and wear-resistant for moving parts.
Carbon fibre sample
Carbon Fibre
High strength and stiffness with low weight.
PVA sample
PVA
Water-soluble support material for complex overhangs.

FDM Material Properties

MaterialColourTensile StrengthTensile ModulusElongation at Break
PLAWhite / Black50 MPa3.5 GPa6%
ABSWhite / Black40 MPa2.0 GPa8%
PETGTranslucent50 MPa2.3 GPa10%
TPU 95ABlack25 MPa0.2 GPa300%
ASALight Grey45 MPa2.1 GPa9%
Nylon (PA12)Natural60 MPa2.8 GPa20%
Carbon Fibre (CF-PA)Black75 MPa5.0 GPa3%

Typical values for XY-plane specimens. Actual performance depends on build orientation, infill and layer height.

Applications

Automotive
Aerospace
Medical
Consumer Electronics
Industrial & Tooling

Quality You Can Count On

ISO 9001 Certified
Quality management system audited and certified.
In-house QC Team
Experienced engineers inspect every build to drawing.
100% Inspection
Every part checked for dimensions and finish before shipping.
Layer Height
0.1 - 0.3 mm
Infill Density
10 - 100%
Print Speed
40 - 100 mm/s
Nozzle Temperature
190 - 230 ℃

Frequently Asked Questions

What is FDM 3D printing?
FDM (Fused Deposition Modelling) builds parts by extruding molten thermoplastic filament layer by layer through a nozzle. It is the most cost-effective process for functional prototypes and end-use polymer parts.
What materials can be used?
We stock over 30 thermoplastics including PLA, ABS, PETG, TPU, ASA, Nylon, PC, Carbon Fibre blends and PVA support. Engineering grades such as PEEK and PEI are available on request.
How long does it take to print my part?
Typical lead time is 2 to 4 days after file approval, including printing and post-processing. Large parts or batches above 100 pieces may take 5 to 7 days.
Do you offer post-processing services?
Yes — support removal, sanding, vapour smoothing, painting, inserts and assembly are all available. We can also provide dimensional inspection reports on request.
Ready to Start Your Project?
Get a Free Quote
Send your 3D file and get a quote within one business day.