FDM 3D Printing Service
Fused Deposition Modelling for durable prototypes and end-use parts — from single units to small batches, with 30+ proven thermoplastics.
What Is Fused Deposition Modelling?
FDM works by heating a thermoplastic filament and extruding it through a nozzle, layer by layer, to build parts from the bottom up. Each pass deposits a thin bead of molten material that fuses to the layer below, creating a solid part directly from a 3D file — no tooling required.
It is the most widely adopted 3D printing process for functional prototypes, jigs and fixtures, and end-use parts, offering the broadest material selection of any polymer process. From a single unit to a few hundred pieces, FDM delivers predictable mechanical performance at a low cost per part.
How It Works
FDM Materials
Eight of our most requested thermoplastics — colour, stiffness, flexibility and heat resistance each covered.
FDM Material Properties
| Material | Colour | Tensile Strength | Tensile Modulus | Elongation at Break |
|---|---|---|---|---|
| PLA | White / Black | 50 MPa | 3.5 GPa | 6% |
| ABS | White / Black | 40 MPa | 2.0 GPa | 8% |
| PETG | Translucent | 50 MPa | 2.3 GPa | 10% |
| TPU 95A | Black | 25 MPa | 0.2 GPa | 300% |
| ASA | Light Grey | 45 MPa | 2.1 GPa | 9% |
| Nylon (PA12) | Natural | 60 MPa | 2.8 GPa | 20% |
| Carbon Fibre (CF-PA) | Black | 75 MPa | 5.0 GPa | 3% |
Typical values for XY-plane specimens. Actual performance depends on build orientation, infill and layer height.
